How to Setting Up an Environment for the Upgrade on huawei S3300 switch

In the BootROM S3352P menu or the command line view, you can use the Trivial File Transfer Protocol (TFTP) or File Transfer Protocol (FTP) to download the system software, and set it as the next startup system software. Then restart the device to complete the upgrade.

The general requirements for setting up an environment for upgrading the system using TFTP or FTP are as follows:

    You can log in to the switch from a PC through the serial interface or Telnet.

    The server and the switch can communicate with each other.

    Files for the upgrade are stored in the server.

You can upgrade the basic and advanced BootROM software using Xmodem in the basic BootROM menu; you can upgrade the system software using Xmodem in the BootROM menu.

The general requirements for setting up an environment for upgrading the system using Xmodem are as follows:

    The RS-232 serial interface on the PC and the console interface on the switch are connected through a console cable.

    Files for the upgrade are stored on the PC.

For more Huawei  information please click here

http://www.huanetwork.com/huawei-ls-s5324tp-si-ac-price_p510.html

How to configure the MTU of an Ethernet Interface on Huawei NE40E Router?

Huawei NE40E Quidway NetEngine40E is based on a 400G platform, which is designed to save energy. Each slot has a forwarding capacity of 400Gbps, and the bandwidth of each slot can be smoothly expanded from 40Gbps to 400Gbps, satisfying the bandwidth demands of the next three to five years. The NE40E is compact in design and the interface density can reach 160 x 10G for a single NE40E and 240 x 10G for a single cabinet, which greatly saves space. Huanetwork.com ships Huawei NE40E router to worldwide.

Step 1:
system-view
The system view is displayed.
Step 2:
interface { ethernet | gigabitethernet } interface-number
The Ethernet interface view is displayed.
Step 3:
mtu mtu
TheIPv4 MTU of the Ethernet interface is configured.
Step 4:
system-view
The system view is displayed.
Step 5:
interface { ethernet | gigabitethernet } interface-number
The Ethernet interface view is displayed.
Step 6:
ipv6 enable
The IPv6 is enabled in this interface.
Step 7:
ipv6 mtu mtu
The IPv6 MTU of the Ethernet interface is configured.


For more Huawei information please click here

http://www.huanetwork.com/gpon-epon-terminal-price_c42

How to configure a DNS Test Instance on Huawei LS-S5348TP-SI-AC switch?

Huawei Quidway Switch S5300, LS-S5348TP-SI-AC Mainframe(44 10/100/1000Base-T ports and 4 gigabit Combo ports,AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
dns resolve
Dynamic DNS resolution is enabled.
Step 3:
nqa test-instance admin-name test-name
An NQA test instance is created, and the NQA view is displayed.
Step 4:
test-type dns
The test type is set to DNS.
Step 5:
destination-address url urlstring
The name of the destination host is configured.
Step 6:
description string
A description is configured for the test instance.
Step 7:
frequency interval
The test period is set for the NQA test instance.
Step 8:
timeout time
The timeout period of a probe is set for the NQA test instance.
Step 9:
records history number
The maximum number of historical records is set for the NQA test instance.
Step 10:
records result number
The maximum number of result records is set for the NQA test instance.
Step 11:
agetime hh:mm:ss
The aging time is set for the NQA test instance.
Step 12:
dns-server ipv4 ip-address
The DNS server address is configured.


For more Huawei ME60-X3 information please click here

How to configure a Recording Scheme on Huawei LS-S3328TP-EI-24S-DC switch?

LS-S3328TP-EI-24S-DC,Huawei Quidway Switch S3300, S3328TP-EI Mainframe(24 100 BASE-X ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 BASE-X) ports and 2 SFP GE (1000 BASE-X) ports (SFP Req.) and DC -48V)

Step 1:
system-view
The system view is displayed.
Step 2:
hwtacacs-server template template-name
The HWTACACS server template is created.
Step 3:
aaa
The AAA view is displayed.
Step 4:
recording-scheme recording-scheme-name
A recording scheme is created and the recording scheme view is displayed.
Step 5:
recording-mode hwtacacs template-name
An HWTACACS server template that is associated with the recording scheme is configured.
Step 6:
quit
Return to the AAA view.
Step 7:
cmd recording-scheme recording-scheme-name
The commands that are used on the S3700 are recorded.
Step 8:
outbound recording-scheme recording-scheme-name
The information about connections is recorded.
Step 9:
system recording-scheme recording-scheme-name
System events are recorded.


For more Huawei MA5600 information please click here

How to configure Remote Port Mirroring on Huawei S3328TP-SI Switch?

Huawei Quidway Switch S3300, S3328TP-SI Mainframe(24 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and 2 SFP GE (1000 BASE-X) ports (SFP Req.) and AC 110/220V)

Step 1:
system-view
The system view is displayed.
Step 2:
vlan vlan-id
An RSPAN VLAN is created and the RSPAN VLAN view is displayed.
Step 3:
mac-address learning disable
The MAC address learning is disabled.
Step 4:
quit
Return to the system view.
Step 5:
observe-port index interface interface-type interface-number [ vlan vlan-id ]
An observing port is configured, and the RSPAN VLAN is specified.
Step 6:
vlan vlan-id
The RSPAN VLAN view is displayed.
Step 7:
mirroring to observe-port index inbound
Remote VLAN mirroring is configured.


For more Huawei S5328C-SI information please click here

How to configure the Peer Mode on Huawei S2309TP Switch?

Huawei Quidway Switch S2300, S2309TP-EI Mainframe(8 10/100 BASE-T ports and 1 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and DC -48V

The Quidway S2300 series switches are new generation Ethernet intelligent access switches. The S2300 is mainly deployed on the IP MAN and intranets, meeting requirements of carrying various Ethernet services and accessing the Ethernet. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S2300 supports rich and flexible service features and thus improves the operability, manageability, and service expansibility. In addition, the S2300 supports powerful lightning protection, security features, ACLs, QinQ, 1:1 VLAN switching, and N:1 VLAN switching to flexibly deploy VLANs

Step 1:
system-view
The system view is displayed.
Step 2:
ifindex constant
The constant interface index feature is enabled.
Step 3:
set constant-ifindex max-number number
The maximum number of interfaces indexed by fixed numbers is set.
Step 4:
set constant-ifindex subinterface { dense-mode | sparse-mode }
The memory distribution mode for the sub-interface index is set.


For more Huawei ls-s2309tp-ei-ac information please click here

Huawei NE40E Router Configuration

Huawei NE40E is based on a 400G platform, which is designed to save energy. Each slot has a forwarding capacity of 400Gbps, and the bandwidth of each slot can be smoothly expanded from 40Gbps to 400Gbps, satisfying the bandwidth demands of the next three to five years. The NE40E is compact in design and the interface density can reach 160 x 10G for a single NE40E and 240 x 10G for a single cabinet, which greatly saves space.

ip netstream sampler fix-packets 1000 inbound

 ip netstream sampler fix-packets 1000 outbound

 ip netstream export source 1.1.1.1

 ip netstream export host 1.1.1.2 9996

ip netstream aggregation protocol-port

 enable

 export version 9

slot 1

 ip netstream sampler to slot self

and on interfaces from which I want to get data

ip netstream in

Performing the configuration, to my surprise the command which is used to configure ACL in other Huawei routers didn’t work in our newly bought NE40E Router. It was because since the router was bought recently, it had updated Version-V300R002_11(OS for Huawei router).

I figured out new way to do it ….so thought it would be useful for people if I share it on my blog.

For more OSN 550 information please click here