VLAN assignment in different usage scenarios

On the S5306, LS-S5352C-EI  EI, S5310EI, S5300HI, and S6300, if both the subnet VLAN and the MAC VLAN with a mask are configured, the MAC VLAN with a mask is first matched regardless of whether the vlan precedence command is used.

Access

Accepts an untagged frame and adds a tag with the default VLAN ID to the frame.

Accepts the tagged frame if the frame's VLAN ID matches the default VLAN ID.

Discards the tagged frame if the frame's VLAN ID differs from the default VLAN ID.

After the PVID tag is stripped, the frame is transmitted.

An access port can belong to only one VLAN. The access interface is directly connected to a computer.

Trunk

Adds a tag with the default VLAN ID to the untagged frame and then transmits it if the default VLAN ID is permitted by the port

Adds a tag with the default VLAN ID to the untagged frame and then discards it if the default VLAN ID is denied by the port.

Accepts the tagged frame if the frame's VLAN ID is permitted by the port.

Discards the tagged frame if the frame's VLAN ID is denied by the port.

If the frame's VLAN ID matches the default VLAN ID and the VLAN ID is permitted by the port, the device removes the tag and transmits the frame.

If the frame's VLAN ID differs from the default VLAN ID, but the VLAN ID is still permitted by the port, the switch will directly transmit the frame.

A trunk port allows packets of multiple VLANs to pass through. It usually connects network devices.

Hybrid

If the frame's VLAN ID is permitted by the port, the frame is transmitted. The port can be configured whether to transmit frames with tags.

A hybrid port allows packets of multiple VLANs to pass through. It can be used to connect network devices or network devices and user devices.

QinQ

QinQ ports are enabled with the IEEE 802.1QinQ protocol. A QinQ port can add double VLAN tags to a data frame, that is, a QinQ port can add a tag to a single-tagged frame. Therefore, a QinQ port supports a maximum of 4094 x 4094 VLAN tags, which meets the requirement on the number of VLANs. For details, see QinQ Overview.

he S5328C-SI  and S5300LI do not support VLAN aggregation.

Configuring a Voice VLAN in Auto Mode on Huawei S2300

Create VLANs and configure the LS-S2309TP-SI-AC  interface on the Switch.

# Create VLAN 2 and VLAN 6.

<Quidway> system-view

[Quidway] vlan batch 2 6

# Configure the link type and default VLAN of the interface.

[Quidway] interface ethernet 0/0/1

[Quidway-Ethernet0/0/1] port hybrid pvid vlan 6

[Quidway-Ethernet0/0/1] port hybrid untagged vlan 6

[Quidway-Ethernet0/0/1] quit

Step 2 Configure the voice VLAN on the Switch.

# Configure the voice VLAN on the interface.

[Quidway] interface ethernet 0/0/1

[Quidway-Ethernet0/0/1] voice-vlan 2 enable

# Set the voice VLAN mode to auto so that the interface can be automatically added to or deleted

from the voice VLAN.

[Quidway-Ethernet0/0/1] voice-vlan mode auto

[Quidway-Ethernet0/0/1] quit

# Set the OUI of the voice VLAN.

[Quidway] voice-vlan mac-address 0011-2200-0000 mask ffff-ff00-0000

# Set the aging time of the voice VLAN.

[Quidway] voice-vlan aging-time 100

# Set the working mode of the voice VLAN.

[Quidway-Ethernet0/0/1] voice-vlan security enable

Step 3 Verify the configuration.

Run the display voice-vlan oui command to check the OUI of the voice VLAN.

<Quidway> display voice-vlan oui

---------------------------------------------------

OuiAddress Mask Description

---------------------------------------------------

0011-2200-0000 ffff-ff00-0000

Run the display voice-vlan 2 status command to check the voice VLAN mode, voice VLAN

security mode, and voice VLAN aging time.

<Quidway> display voice-vlan 2 status

Voice VLAN Configurations:

S2300 Series Ethernet Switches

Typical Configuration Examples 1 Configuration Guide - Ethernet

Issue 02 (2012-10-27) Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

22

---------------------------------------------------

Voice VLAN ID : 2

Voice VLAN status : Enable

Voice VLAN aging time : 100 (minutes)

Voice VLAN 8021p remark : 6

Voice VLAN dscp remark : 46

----------------------------------------------------------

Port Information:

-----------------------------------------------------------

Port Add-Mode Security-Mode Legacy

-----------------------------------------------------------

Ethernet0/0/1 Auto Security LS-S2318TP-EI-DC  Disable

Configuring an FTP Huawei S3300

Configure SwitchB LS-S3328TP-EI-24S-AC .

# Configure an IP address for SwitchB.

<Quidway> system-view

[Quidway] sysname SwitchB

[SwitchB] vlan 100

[SwitchB-vlan100] quit

[SwitchB] interface ethernet 0/0/1

[SwitchB-Ethernet0/0/1] port hybrid pvid vlan 100

[SwitchB-Ethernet0/0/1] port hybrid untagged vlan 100

[SwitchB-Ethernet0/0/1] quit

[SwitchB] interface Vlanif 100

[SwitchB-Vlanif100] ip address 10.1.1.2 24

[SwitchB-Vlanif100] quit

# Configure SwitchB as the FTP server.

[SwitchB] ftp server enable

[SwitchB] aaa

[SwitchB-aaa] local-user user1 password cipher hello123

[SwitchB-aaa] local-user user1 privilege level 15

[SwitchB-aaa] local-user user1 service-type ftp

[SwitchB-aaa] local-user user1 ftp-directory flash:/

[SwitchB-aaa] quit

Step 2 Configure SwitchA.

# Configure an IP address for SwitchA.

<Quidway> system-view

[Quidway] sysname SwitchA

[SwitchA] vlan 100

[SwitchA] interface ethernet 0/0/1

[SwitchA-Ethernet0/0/1] port hybrid pvid vlan 100

[SwitchA-Ethernet0/0/1] port hybrid untagged vlan 100

[SwitchA-Ethernet0/0/1] quit

[SwitchA] interface Vlanif 100

[SwitchA-Vlanif100] ip address 10.1.1.1 24

[SwitchA-Vlanif100] quit

# Create an NQA FTP test on SwitchA and create a file of 10 KB for uploading.

[SwitchA] nqa test-instance admin ftp

[SwitchA-nqa-admin-ftp] test-type ftp

[SwitchA-nqa-admin-ftp] destination-address ipv4 10.1.1.2

[SwitchA-nqa-admin-ftp] source-address ipv4 10.1.1.1

[SwitchA-nqa-admin-ftp] ftp-operation put

[SwitchA-nqa-admin-ftp] ftp-username user1

[SwitchA-nqa-admin-ftp] ftp-password hello123

[SwitchA-nqa-admin-ftp] ftp-filesize 10

Step 3 Start the test instance.

[SwitchA-nqa-admin-ftp] start now

Check the configuration.

# Check NQA test results on SwitchA.

[SwitchA-nqa-admin-ftp] display nqa results test-instance admin ftp

NQA entry(admin, ftp) :testflag is inactive ,testtype is ftp

1 . Test 1 result The test is finished

SendProbe:1 ResponseProbe:1

Completion :success RTD OverThresholds number: 0

MessageBodyOctetsSum: 10240 Stats errors number: 0

Operation timeout number: 0 System busy operation number:0

Drop operation number:0 Disconnect operation number: 0

CtrlConnTime Min/Max/Average: 657/657/657

DataConnTime Min/Max/Average: 500/500/500

SumTime Min/Max/Average: 1157/1157/1157

Average RTT:656

Lost packet ratio:0 %

# On SwitchB, you can view that a file named nqa-ftp-test.txt is added. Part of the file on the

SwitchB is displayed.

<SwitchB  LS-S3352P-EI-AC > dir

Directory of flash:/

0 -rw- 331 Jul 06 2007 18:34:34 private-data.txt

1 -rw- 10,240 Jul 06 2007 18:37:06 nqa-ftp-test.txt

2,540 KB total (1,536 KB free)

configuration S5300 file, and patch files

ftp> binary

200 Type set to I.

ftp> get S5328C-SI  -V200R002C00SPC100.cc

200 Port command okay.                                                   

150 Opening BINARY mode data connection for file transfer.                     

226 Transfer complete.

ftp: 12472284 bytes received in 80.33Seconds 1350.65Kbytes/sec.

The preceding output indicates the configuration file has been transferred and you can find it in D:\>.

ftp> get vrpcfg.zip

200 Port command okay.                                                   

150 Opening BINARY mode data connection for file transfer.                     

226 Transfer complete.

ftp: 589 bytes received in 0.01Seconds 60Kbytes/sec.

The preceding output indicates the configuration file has been transferred and you can find it in D:\>.

ftp> get S5324TP-SI   sph001.pat

200 Port command okay.                                                   

150 Opening BINARY mode data connection for file transfer.                     

226 Transfer complete.

ftp: 333436 bytes received in 0.33Seconds 1350.65Kbytes/sec.

The preceding output indicates the configuration file has been transferred and you can find it in D:\>.

Use the S5300 as the TFTP Client

Directory of flash:/

  Idx  Attr     Size(Byte)  Date        Time(LMT)      FileName

    0  -rw-     12,472,284  Nov 04 2010 19:43:18   S5352C-EI-V200R002C00SPC100.cc

30,008 KB total (16,544 KB free)

<Quidway> dir *.zip

Directory of flash:/

  Idx  Attr     Size(Byte)  Date        Time(LMT)      FileName

    0  -rw-            589  Nov 04 2010 20:55:54    vrpcfg.zip

30,008 KB total (16,544 KB free)

<Quidway> dir *.pat

Directory of flash:/

  Idx  Attr     Size(Byte)  Date        Time(LMT)       FileName

    0  -rw-        333,436  Jan 29 2010 16:54:40    s5300sph001.pat

30,008 KB total (16,544 KB free)

Run the following commands on the S5300 to back up the data. The backup system software is S5300-V200R002C00SPC100-bak.cc, the backup configuration file is vrpcfg-bak.zip, and the patch file is s5300sph001-bak.pat.

<Quidway> tftp 10.164.30.29 put S5300-V200R002C00SPC100.cc  S5300-V200R002C00SPC100-bak.cc

Info: Transfer file in binary mode.                                            

Uploading the file to the remote TFTP server. Please wait...|                  

TFTP: Uploading the file successfully.                                         

12472284 bytes send in 160 seconds.

<Quidway> tftp 10.164.30.29 put vrpcfg.zip vrpcfg-bak.zip

Info: Transfer file in binary mode.

  Uploading the file to the remote TFTP server. Please wait.../

  TFTP: Uploading the file successfully. 

  589 bytes send in 0.01 second.

<Quidway> tftp 10.164.30.29 put s5300sph001.pat s5300sph001-bak.pat                                                            

Info: Transfer file in binary mode.                                            

Uploading the file to the remote TFTP server. Please wait...\                  

TFTP: Uploading the file successfully.                                          

  333436 bytes send in 1 second.

3.    Obtain the system software of the target version from the server.

<Quidway> tftp 10.164.30.29 get S5300EI-V200R003C00SPC300.cc

Info: Transfer file in binary mode.

  Downloading the file from the remote TFTP server. Please wait.../

TFTP: Downloading the file successfully.

14,066,348 bytes received in 109 seconds

If the message "Downloading the file successfully" is displayed, the system software has been downloaded.

4.    (Optional) Obtain the new configuration file from the server.

If the configuration file does not need to be changed after the upgrade, this step is not required.

<Quidway> tftp 10.164.30.29 get vrpcfgnew.zip                        

Info: Transfer file in binary mode.                                             

Downloading the file from the remote TFTP server. Please wait.../              

TFTP: Downloading the file successfully.                                       

    2757 bytes received in 1 second.

5.    Specify the system software in service, which is loaded when the S5300 is started.

<Quidway> startup system-software S5300EI-V200R003C00SPC300.cc

If the following information is displayed after you run the startup system-software file command, enter Y to update the BootROM. If the BootROM is upgraded successfully, go to step 7; otherwise, go to step 6. When you upgrade a stack of V100R003, you must manually upgrade the BootROM according to step 6.

Warning: Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y

BOOTROM begin to be upgraded ! please wait for a moment...,

Info: BOOTROM upgrade is ok.

Succeeded in setting the software for booting system.

6.    (Optional) Upgrade the BootROM in service, which is loaded when the S5300 is started.

<Quidway> system-view

[Quidway] upgrade basic-bootrom S5300EI-V200R003C00SPC300.cc

Warning: Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y

Upgrading BOOTROM,please wait for a moment...,

[Slot 0]:

Info: BOOTROM upgrade is ok.

Succeeded in setting the software for booting system.

In V100R003 or a later version, the BootROM is upgraded automatically. To upgrade the software to other versions, you must upgrade the BootROM manually. For details about automatic BootROM upgrade, see Step 5. In the case of a version rollback, you are advised to manually upgrade the BootROM to prevent a rollback failure.

7.    Restart the S5300.

After the software is upgraded to V200R003C00SPC300, you must specify the system software for next startup. If the system software is not specified or the invalid software is specified, the device will fail to restart. For details about specifying the system software for next startup, see Step 5.

When the system asks you whether to save the configuration, enter y or n. After the setting is complete, enter y to restart the system.

<Quidway> reboot

Info: The system is now comparing the configuration, please wait.              

Warning: The configuration has been modified, and it will be saved to the next s

tartup saved-configuration file flash:/103_xu.cfg. Continue? [Y/N]:y            

Now saving the current configuration to the slot 0..                           

Save the configuration successfully.                                           

Info: If want to reboot with saving diagnostic information, input 'N' and then e

xecute 'reboot save diagnostic-information'.                                   

System will reboot! Continue?[Y/N]:y                                           

Info: System is rebooting, please wait...

Quidway S5328C-EI series switches which are new generation Ethernet gigabit switches that meet the requirements for high-bandwidth access and Ethernet multi-service convergence, providing powerful Ethernet functions for operators and enterprise customers.

LS-S2318TP-EI-DC VS LS-S2318TP-SI-AC, The Difference

What are the difference of LS-S2318TP-EI-DC and LS-S2318TP-SI-AC?

Huawei LS-S2318TP-EI-DC: Huawei Quidway Switch S2300, S2318TP-EI Mainframe(16 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and DC -48V)

Huawei LS-S2318TP-SI-AC: Huawei Quidway Switch S2300, S2318TP-SI Mainframe(16 10/100 BASE-T ports and 2 Combo GE(10/100/1000 BASE-T+100/1000 Base-X) ports and AC 110/220V)

The Quidway S2300 series switches are new generation Ethernet intelligent access switches. The S2300 is mainly deployed on the IP MAN and intranets, meeting requirements of carrying various Ethernet services and accessing the Ethernet. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S2300 supports rich and flexible service features and thus improves the operability, manageability, and service expansibility. In addition, the S2300 supports powerful lightning protection, security features, ACLs, QinQ, 1:1 VLAN switching, and N:1 VLAN switching to flexibly deploy VLANs.

The difference on the price:

According to our research, www.huanetwork.com is a great wholesell supplier for huawei switch, and the best price form.

LS-S2318TP-EI-DC price : $239.00

LS-S2318TP-SI-AC price : $195.00

Request a quote for them by emailing us at sales@huanetwork.com or pick up the phone and speak to one of our friendly and helpful sales reps at +852-30501940 (Hong Kong).

GPON standard change

Trouble Ticket No./CR No.Huawei GPON Original requirement

Change If the OLT is connected to a Huawei ONT whose OMCI version is 0xa0 or later and the ONT reports the proprietary entity 0xff93 to the OLT, multicast configuration is issued to the ONT using the standard protocol.

Reason for Change Before the standard change, the ONT whose OMCI version is 0xa0 or later supports the multicast proprietary protocol; after the standard change, such ONTs support the standard protocol.

Impact Upgrades and services are not affected.

Original requirement If the OLT is connected to a Huawei ONT whose OMCI version is 0xa0 or later, the ID of the MAC bridge service profile instance created in single-bridge mode is changed from 0 to 1. The interoperability specification defines that in the scenario with variable-length OMCI messages, the ID of the MAC bridge service profile instance created in single-bridge mode is 1. Services are not affected.

Original requirement When the board that does not support variable-length OMCI messages is replaced with the board that supports variable-length OMCI messages, and the interconnected ONT is of OMCI version 0xB0 or later, the board issues variable-length OMCI messages to the ONT. The G.988 variable-length OMCI messages are supported.ONT configuration, upgrades, or services are not affected.

Terminals that are not listed in the attachment above may not match the specific OLT version. If such a terminal is used, confirm with Huawei technical support personnel first

For more Huawei HG8240 information please click here