Use the S5300 as the TFTP Client

Directory of flash:/

  Idx  Attr     Size(Byte)  Date        Time(LMT)      FileName

    0  -rw-     12,472,284  Nov 04 2010 19:43:18   S5352C-EI-V200R002C00SPC100.cc

30,008 KB total (16,544 KB free)

<Quidway> dir *.zip

Directory of flash:/

  Idx  Attr     Size(Byte)  Date        Time(LMT)      FileName

    0  -rw-            589  Nov 04 2010 20:55:54    vrpcfg.zip

30,008 KB total (16,544 KB free)

<Quidway> dir *.pat

Directory of flash:/

  Idx  Attr     Size(Byte)  Date        Time(LMT)       FileName

    0  -rw-        333,436  Jan 29 2010 16:54:40    s5300sph001.pat

30,008 KB total (16,544 KB free)

Run the following commands on the S5300 to back up the data. The backup system software is S5300-V200R002C00SPC100-bak.cc, the backup configuration file is vrpcfg-bak.zip, and the patch file is s5300sph001-bak.pat.

<Quidway> tftp 10.164.30.29 put S5300-V200R002C00SPC100.cc  S5300-V200R002C00SPC100-bak.cc

Info: Transfer file in binary mode.                                            

Uploading the file to the remote TFTP server. Please wait...|                  

TFTP: Uploading the file successfully.                                         

12472284 bytes send in 160 seconds.

<Quidway> tftp 10.164.30.29 put vrpcfg.zip vrpcfg-bak.zip

Info: Transfer file in binary mode.

  Uploading the file to the remote TFTP server. Please wait.../

  TFTP: Uploading the file successfully. 

  589 bytes send in 0.01 second.

<Quidway> tftp 10.164.30.29 put s5300sph001.pat s5300sph001-bak.pat                                                            

Info: Transfer file in binary mode.                                            

Uploading the file to the remote TFTP server. Please wait...\                  

TFTP: Uploading the file successfully.                                          

  333436 bytes send in 1 second.

3.    Obtain the system software of the target version from the server.

<Quidway> tftp 10.164.30.29 get S5300EI-V200R003C00SPC300.cc

Info: Transfer file in binary mode.

  Downloading the file from the remote TFTP server. Please wait.../

TFTP: Downloading the file successfully.

14,066,348 bytes received in 109 seconds

If the message "Downloading the file successfully" is displayed, the system software has been downloaded.

4.    (Optional) Obtain the new configuration file from the server.

If the configuration file does not need to be changed after the upgrade, this step is not required.

<Quidway> tftp 10.164.30.29 get vrpcfgnew.zip                        

Info: Transfer file in binary mode.                                             

Downloading the file from the remote TFTP server. Please wait.../              

TFTP: Downloading the file successfully.                                       

    2757 bytes received in 1 second.

5.    Specify the system software in service, which is loaded when the S5300 is started.

<Quidway> startup system-software S5300EI-V200R003C00SPC300.cc

If the following information is displayed after you run the startup system-software file command, enter Y to update the BootROM. If the BootROM is upgraded successfully, go to step 7; otherwise, go to step 6. When you upgrade a stack of V100R003, you must manually upgrade the BootROM according to step 6.

Warning: Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y

BOOTROM begin to be upgraded ! please wait for a moment...,

Info: BOOTROM upgrade is ok.

Succeeded in setting the software for booting system.

6.    (Optional) Upgrade the BootROM in service, which is loaded when the S5300 is started.

<Quidway> system-view

[Quidway] upgrade basic-bootrom S5300EI-V200R003C00SPC300.cc

Warning: Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y

Upgrading BOOTROM,please wait for a moment...,

[Slot 0]:

Info: BOOTROM upgrade is ok.

Succeeded in setting the software for booting system.

In V100R003 or a later version, the BootROM is upgraded automatically. To upgrade the software to other versions, you must upgrade the BootROM manually. For details about automatic BootROM upgrade, see Step 5. In the case of a version rollback, you are advised to manually upgrade the BootROM to prevent a rollback failure.

7.    Restart the S5300.

After the software is upgraded to V200R003C00SPC300, you must specify the system software for next startup. If the system software is not specified or the invalid software is specified, the device will fail to restart. For details about specifying the system software for next startup, see Step 5.

When the system asks you whether to save the configuration, enter y or n. After the setting is complete, enter y to restart the system.

<Quidway> reboot

Info: The system is now comparing the configuration, please wait.              

Warning: The configuration has been modified, and it will be saved to the next s

tartup saved-configuration file flash:/103_xu.cfg. Continue? [Y/N]:y            

Now saving the current configuration to the slot 0..                           

Save the configuration successfully.                                           

Info: If want to reboot with saving diagnostic information, input 'N' and then e

xecute 'reboot save diagnostic-information'.                                   

System will reboot! Continue?[Y/N]:y                                           

Info: System is rebooting, please wait...

Quidway S5328C-EI series switches which are new generation Ethernet gigabit switches that meet the requirements for high-bandwidth access and Ethernet multi-service convergence, providing powerful Ethernet functions for operators and enterprise customers.