Directory
of flash:/
Idx
Attr Size(Byte) Date
Time(LMT) FileName
0
-rw- 12,472,284 Nov 04 2010 19:43:18 S5352C-EI-V200R002C00SPC100.cc
30,008
KB total (16,544 KB free)
<Quidway>
dir *.zip
Directory
of flash:/
Idx
Attr Size(Byte) Date
Time(LMT) FileName
0
-rw- 589 Nov 04 2010 20:55:54 vrpcfg.zip
30,008
KB total (16,544 KB free)
<Quidway>
dir *.pat
Directory
of flash:/
Idx
Attr Size(Byte) Date
Time(LMT) FileName
0
-rw- 333,436 Jan 29 2010 16:54:40 s5300sph001.pat
30,008
KB total (16,544 KB free)
Run
the following commands on the S5300 to back up the data. The backup system
software is S5300-V200R002C00SPC100-bak.cc, the backup configuration file is
vrpcfg-bak.zip, and the patch file is s5300sph001-bak.pat.
<Quidway>
tftp 10.164.30.29 put S5300-V200R002C00SPC100.cc S5300-V200R002C00SPC100-bak.cc
Info:
Transfer file in binary mode.
Uploading
the file to the remote TFTP server. Please wait...|
TFTP:
Uploading the file successfully.
12472284
bytes send in 160 seconds.
<Quidway>
tftp 10.164.30.29 put vrpcfg.zip vrpcfg-bak.zip
Info:
Transfer file in binary mode.
Uploading the file to the remote TFTP server.
Please wait.../
TFTP: Uploading the file successfully.
589 bytes send in 0.01 second.
<Quidway>
tftp 10.164.30.29 put s5300sph001.pat s5300sph001-bak.pat
Info:
Transfer file in binary mode.
Uploading
the file to the remote TFTP server. Please wait...\
TFTP:
Uploading the file successfully.
333436 bytes send in 1 second.
3. Obtain the system software of the target
version from the server.
<Quidway>
tftp 10.164.30.29 get S5300EI-V200R003C00SPC300.cc
Info:
Transfer file in binary mode.
Downloading the file from the remote TFTP
server. Please wait.../
TFTP:
Downloading the file successfully.
14,066,348
bytes received in 109 seconds
If
the message "Downloading the file successfully" is displayed, the
system software has been downloaded.
4. (Optional) Obtain the new configuration file
from the server.
If
the configuration file does not need to be changed after the upgrade, this step
is not required.
<Quidway>
tftp 10.164.30.29 get vrpcfgnew.zip
Info:
Transfer file in binary mode.
Downloading
the file from the remote TFTP server. Please wait.../
TFTP:
Downloading the file successfully.
2757 bytes received in 1 second.
5. Specify the system software in service,
which is loaded when the S5300 is started.
<Quidway>
startup system-software S5300EI-V200R003C00SPC300.cc
If
the following information is displayed after you run the startup
system-software file command, enter Y to update the BootROM. If the BootROM is
upgraded successfully, go to step 7; otherwise, go to step 6. When you upgrade
a stack of V100R003, you must manually upgrade the BootROM according to step 6.
Warning:
Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y
BOOTROM
begin to be upgraded ! please wait for a moment...,
Info:
BOOTROM upgrade is ok.
Succeeded
in setting the software for booting system.
6. (Optional) Upgrade the BootROM in service,
which is loaded when the S5300 is started.
<Quidway>
system-view
[Quidway]
upgrade basic-bootrom S5300EI-V200R003C00SPC300.cc
Warning:
Basic BOOTROM will be upgraded. Continue?(Y/N)[N]: y
Upgrading
BOOTROM,please wait for a moment...,
[Slot
0]:
Info:
BOOTROM upgrade is ok.
Succeeded
in setting the software for booting system.
In
V100R003 or a later version, the BootROM is upgraded automatically. To upgrade
the software to other versions, you must upgrade the BootROM manually. For
details about automatic BootROM upgrade, see Step 5. In the case of a version
rollback, you are advised to manually upgrade the BootROM to prevent a rollback
failure.
7. Restart the S5300.
After
the software is upgraded to V200R003C00SPC300, you must specify the system
software for next startup. If the system software is not specified or the
invalid software is specified, the device will fail to restart. For details
about specifying the system software for next startup, see Step 5.
When
the system asks you whether to save the configuration, enter y or n. After the
setting is complete, enter y to restart the system.
<Quidway>
reboot
Info:
The system is now comparing the configuration, please wait.
Warning:
The configuration has been modified, and it will be saved to the next s
tartup
saved-configuration file flash:/103_xu.cfg. Continue? [Y/N]:y
Now
saving the current configuration to the slot 0..
Save
the configuration successfully.
Info:
If want to reboot with saving diagnostic information, input 'N' and then e
xecute
'reboot save diagnostic-information'.
System
will reboot! Continue?[Y/N]:y
Info:
System is rebooting, please wait...
Quidway
S5328C-EI series switches which are new generation Ethernet gigabit switches that
meet the requirements for high-bandwidth access and Ethernet multi-service
convergence, providing powerful Ethernet functions for operators and enterprise
customers.
is there who can help me to upgrade software S3328tp. so that I can set through the web page.
回复删除I need some files for download, but I do not have access to download it.
is there someone who can help me kindly.
This version of the s3328 I have.
display version
Huawei Versatile Routing Platform Software
VRP (R) Software, Version 5.30 (S3328 V100R002C02SPC100)
Copyright (C) 2007-2008 Huawei Technologies Co., Ltd.
Quidway S3328TP-EI uptime is 0 day, 1 hour, 22 minutes
s there who can help me to upgrade software S3328tp. so that I can set through the web page.
回复删除I need some files for download, but I do not have access to download it.
is there someone who can help me kindly.
This version of the s3328 I have.
display version
Huawei Versatile Routing Platform Software
VRP (R) Software, Version 5.30 (S3328 V100R005C01SPC100)
Copyright (C) 2000-2011 Huawei Technologies Co., Ltd.
Quidway S3328TP-EI uptime is 45 day, 10 hour, 20 minutes
此评论已被作者删除。
回复删除Can I help with my Quidway S5328c-EI-24S switch?
回复删除Need an operating system S5300EI-V200R003C00SPC300.zip I could not download it from the site Can I send it to me on e-mail or give me a tolerance to download it
Where I work in an educational institution at the University of Sana'a
Thanks